Operating voltage 230 V~ Frequency 50/60 Hz Power consumption (standby) < 0,3/0,7 230 V incandescent and halogen lamps 35 - 300 W/channel Electronic transformers and dual-mode transformers 35 - 300 W/channel Dimmable conventional transformers 35 - 300 VA/channel Dimmable energy-saving lamps 15 - 54 W/channel Dimmable 230 V retrofit LED lamps 12 - 40 W/channel Operating temperature -5 - +45 °C Relative humidity 0 - 65 % No condensation Number of extension units unbegrenzt Extension unit cable length, max. 50 m/channel Screw terminals for max. 1 x 4 / 2 x 2,5 mm² Installation depth 32 mm
Do not connect inductive and capacitive loads jointly per series.
Scene function (on/off, dimming value) in conjunction with KNX radio application module.
For trouble-free operation, we recommend Berker Tronic transformers. Low intrinsic energy requirement Automatic setting of the minimum starting brightness for 230 V LED and energy-saving lamps For each series, with extension unit input for push-button (NO contact) single-surface operation bulb-preserving soft startup short-circuit and overload proof (electronic fuse) phase cut-on or cut-off per series according to load type, self-learning When cover is detached, the switch status is retained for 10 s No conductive connection between supporting ring and spreading claws with screw terminals